Type of via for Flex rigid PCB
In order to integrate design and production, Flex rigid PCB factory’s engineers need to consider the following issues:
(1) the via cannot be located on the pad;
(2) the contact area between the metal shell of the device and the Flex rigid PCB extends outward and there can be no via in the 1.5mm area.
(3) there should be no via in the spot coating or printing area of the patch. Such as the use of patch glue dot coating or printing process of CHIP, SOP components under the Flex rigid PCB area.
(4) the inner diameter of the full pass hole requires 0.2mm (8mil) and above in principle, and the outer diameter is above 0.4mm (16mil). If there are difficulties, the outer diameter must be controlled as 0.35mm (14mil).
(5) it is suggested that buried blind holes should not be used in the design of BGA in 0.65mm and above, and the cost will be greatly increased.
(6) the distance between the via and the via should not be too close, drilling is easy to cause hole breakage, generally require hole spacing 0.5mm or above, 0.35mm-0.4mm to avoid, 0.3mm and below prohibited.
Other news about S&L
- Scan to Discover Your Past Life? See How PCB Factories Use Traceability Systems to Create a Quality
- Joining Hands with AI to Forge the New Future of Smart Manufacturing at Sun&Lynn Circuits
- Sun&Lynn Circuits CO., Ltd. was invited to attend the Sixth Global Customs AEO Conference!
- Celebrating the Establishment of SUNLYNN CIRCUITS(THAILAND)
- Good News! Sun&Lynn Circuits Co.,Ltd. is honored as one of the Top 100 Innovative Enterprises in Bao
- What Should You Know about Metal Core PCB？
- FPC supplier ： the types of Flexible PCB
- PCB manufacturer China：Why PCB board snake line, what is it used for？
- What is Metal Core PCB and types of Metal Core PCB？
- Why are High frequency PCBs much more expensive than normal PCBs?
Your browsing history
- FPC manufacturer tells you what is FPC board drilling through holes
- PCB supplier China：What Electronic Circuits are？
- FPC supplier：What is solder ball defect？
- PCB manufacturer China：PCB Introduction & PCB Types
- PCB factory china tells you what is PCB bonding process
- Multi-layer PCB Tolerances FOR FABRICATION & ASSEMBLY
- Hard Gold Surface Finish for Rigid flex PCB
- Automotive PCB manufacturer：What are the Internal Composition Layers of a PCB?
- Flex rigid PCB manufacturer：Causes of PCB warping
- What good qualities FPC supplier can provide you
A total of -comments【I want to comment】