PCB manufacturer China:Does the chassis height of pure electric vehicles affect battery safety?
For a fuel-powered car, the engine, chassis and gearbox are the three most important components, of which the engine is the heart of the car. But now many pure electric vehicles have appeared. These vehicles do not consume fuel, but rely on batteries to provide power. For this reason, the batteries of pure electric vehicles are the most important parts. At present, most electric vehicles place battery packs on the chassis, so will pure electric vehicles affect the safety of batteries because of the chassis height? Insiders give the answer.
In fact, the protection of the chassis is also fully taken into account in the fuel-fired version of the car, but after buying a new car, people usually directly make a chassis armor, which can also protect the chassis to a large extent. When designing new energy vehicles, this problem was fully considered, except that it did not use chassis armor, but a chassis protective shell.

No matter what kind of pure electric vehicle it is, there will be a protective cover outside the battery. The outer cover is not only to protect the battery, but also has some functions of heat dissipation and heat management inside. Therefore, the protective measures for the battery are more and more in place for each large vehicle enterprise. Even if it is placed in the chassis, the chassis height will not affect the safety of the battery as long as it is not very extreme.
However, for pure electric vehicles with low chassis, it is not recommended to run on some rotten roads. Because if the passing ability is not high, it is easy to cause problems and is suitable for flat roads. As for those cars with batteries installed on the chassis and inside the car, there are also strong protection measures around the batteries. A slight touch and knock on the batteries will be fine.
Therefore, PCB manufacturer China think that,the impact of chassis height on car batteries cannot be said to be totally absent, but it has not yet reached the point where an accident will occur at the touch of the chassis. And with the continuous development of automobile technology, battery performance and protective measures are developing in a better and better direction and will not regress.
Other news about S&L
- Scan to Discover Your Past Life? See How PCB Factories Use Traceability Systems to Create a Quality
- Joining Hands with AI to Forge the New Future of Smart Manufacturing at Sun&Lynn Circuits
- Sun&Lynn Circuits CO., Ltd. was invited to attend the Sixth Global Customs AEO Conference!
- Celebrating the Establishment of SUNLYNN CIRCUITS(THAILAND)
- Good News! Sun&Lynn Circuits Co.,Ltd. is honored as one of the Top 100 Innovative Enterprises in Bao
- What Should You Know about Metal Core PCB?
- FPC supplier : the types of Flexible PCB
- PCB manufacturer China:Why PCB board snake line, what is it used for?
- What is Metal Core PCB and types of Metal Core PCB?
- Why are High frequency PCBs much more expensive than normal PCBs?
Your browsing history
- FPC manufacturer tells you What is microvia aspect ratio and why is it important for FPC design
- Automatic exposure machine for FPC
- What is Health care PCB routing?
- Sun&Lynn tells you the Benefits of Flex-Rigid PCBs
- What is Comparative Tracking Index (CTI) of the PCB base material in PCB manufacturer China
- What are the Differences Between Flex rigid PCB and Flexible PCB Assemblies?
- PCB factory china:What is a moisture senstive device?
- Metal core PCB:Classification and Features of PCB
- ADVANTECH
- PCB manufacturer China:What’s Solder Mask in PCB manufacturing



A total of -comments【I want to comment】