PCB manufacturer China:The Process of Manufacturing PCB Blind-via(盲孔)
PCBmanufacturerChina talked:the Process of Manufacturing PCB Blind-via(盲孔)
1. Sequential lamination
In this process, an extremely thin laminate undergoes all the production steps required to manufacture a double-sided PCB. It is drilling, etching, and plating. Subsequently, this layer is stacked with all other layers of the PCB. The number of manufacturing steps involved in this method of manufacturing blind vias makes it very expensive.
2. Photo defined
PCBsupplier learned that,this manufacturing process involves laminating photosensitive resin sheets onto the core. The pattern covering the photosensitive film is exposed to light, making the remaining material hard. Remove the material from the hole using an etching solution. Copper is plated on the holes and outer surface to create the outer layer of the PCB. When there are a large number of blind vias on the PCB, this blind via production method is cost-effective.
3. Controlled depth
This method uses the same drilling process as through-hole drilling. In addition to drilling a certain depth hole on the PCB and then plating it on. Generally speaking, drilling is a cost driver, but this method is the cheapest way to manufacture blind via, but the minimum width that can be drilled depends on the smallest available drill bit size, typically 0.15 mm.
4. Laser drilled
This process is completed after all layers of the PCB are laminated, but before the outer layer is etched and laminated. By laser drilling copper and dielectric materials in one stage, a through hole can be created. This is an economically effective method. To reduce costs and shorten production time, laser drilling holes may be a better choice than through holes.
FPCmanufacturer learned that,PCB blind via circuit boards plays a crucial role in the performance and stability of electronic products. They can reduce signal interference, increase board density and number of holes, and improve the stability of electronic products.
Other news about S&L
- Celebrating the Establishment of SUNLYNN CIRCUITS(THAILAND)
- Good News! Sun&Lynn Circuits Co.,Ltd. is honored as one of the Top 100 Innovative Enterprises in Bao
- What Should You Know about Metal Core PCB?
- FPC supplier : the types of Flexible PCB
- PCB manufacturer China:Why PCB board snake line, what is it used for?
- What is Metal Core PCB and types of Metal Core PCB?
- Why are High frequency PCBs much more expensive than normal PCBs?
- Flexible PCB supplier China :When to use flexible PCB?
- Flexible PCB manufacturer:What Is Flex Soldering?
- What Is Automotive PCB? Why we use automotive PCB?
Your browsing history
- Sun&Lynn tells you the Benefits of Flex-Rigid PCBs
- Design Rules For rigid-flex PCB manufacturers
- Lamination machine
- EVOC
- Winter Solstice Festival | Sun&Lynn invite you to eat dumplings ~
- ABB
- Sun&Lynn High frequency PCB factory 2024 Nepcon Japan Electronics Show successfully concluded!
- S&L confirms her booth in Electronica 2016
- Types of Automotive PCBs
- PCB supplier china tells you What is Wave Soldering
A total of -comments【I want to comment】