Flexible PCB manufacturer：What are the differences between Flex and Rigid boards

Article source：Editor：Sun&Lynn Mobile phone view

Sweep!

Popularity：981Dated ：03-04-2022 06:19【big well Small】

Flexible PCB manufacturer tells you what are the differences between Flex and Rigid boards

Flexible printed circuit boards are quite different than rigid boards:

Material; Rigid boards are typically made out of FR4 (glass-epoxy compounds) while flexible circuits are made from polyimide. There are cases when rigid boards are built with polyimide, but it isn't as common.
Coverlay; Flex pcbs either have a flexible mask or coverlay while rigid boards typically just use a solder mask. When a coverlay is used, the openings are routed, or laser cut. Then an adhesive (typically 1 or 2 mils thick) is used to adhere the coverlay to the flex.
Stiffeners; Flexible printed circuit boards typically use FR4 or polyimide stiffeners to stiffen specific non-flexing regions. Stiffeners are either laminated to the flex or adhered using a PSA (pressure sensitive adhesive). Rigid boards do not need stiffeners.

Check all comments