Flexible PCB supplier china :What is PCB Etch Factor?
PCB Etch Factor or etch compensation is an etching process modification used by the Flexible PCB supplier china to decide the extent and accuracy of etching. It helps the designers and manufacturers decide the minimum etching allowance on the track width. During etching, unwanted copper is removed gradually from the PCB surface to realize the desired conductive track.
For instance, if a PCB design requires a track width of 0.25 mm, then the Flexible PCB supplier china has to initiate etching if the track width is more than 0.25 mm. The amount by which the track width is increased is called etch factor. It is proportional to the copper weight required to be removed. More copper to be removed indicates a higher value of the etch factor.
No etching process gives perfect straight cuts, they always create undercut, an etching defect, which can be seen in the figure below.
In mathematical terms, an etch factor is the ratio of track width to the amount of undercut. The PCB CAD designer in Flexible PCB supplier china has to provide enough spacing in the design so that a manufacturer is able to utilize that space to start etching with a little wider track. The minimum spacing in the design must meet the manufacturer’s decided minimum space.
Other news about S&L
- Celebrating the Establishment of SUNLYNN CIRCUITS(THAILAND)
- Good News! Sun&Lynn Circuits Co.,Ltd. is honored as one of the Top 100 Innovative Enterprises in Bao
- What Should You Know about Metal Core PCB?
- FPC supplier : the types of Flexible PCB
- PCB manufacturer China:Why PCB board snake line, what is it used for?
- What is Metal Core PCB and types of Metal Core PCB?
- Why are High frequency PCBs much more expensive than normal PCBs?
- Flexible PCB supplier China :When to use flexible PCB?
- Flexible PCB manufacturer:What Is Flex Soldering?
- What Is Automotive PCB? Why we use automotive PCB?
Your browsing history
- PCB supplier china tells you What is Wave Soldering
- Huawei
- What are The Advantages of Metal Core PCB?
- PCB factory china:What is No-Clean Flux?
- FPC Supplier In China
- High Volume Health care PCB Assembly Benefits
- What are the reasons for the failure of solder joints in Automotive PCB assembly
- FPC MANUFACTURER TELLS PCB TEST METHODS SHOULD BE BASED AROUND YOUR OBJECTIVES
- What are the benefits and advantages of the rigid-flex PCB board
- Siemens
A total of -comments【I want to comment】